IMU

Weight

3.5 KG

Flight Radius

15 KM

Altitude

400 M

Hovering Time

45 Minutes

Inertial Measurement Unit

MU232

MU232 adopts the inertial measurement unit (IMU) of high precision gyroscope and accelerometer, and carries out the internal parameter compensation of the full temperature range. The angular velocity and linear acceleration of the output carrier can maintain a high measurement accuracy for a long time. Advanced MEMS process, structural sealing design and other measures to ensure the adaptability of the product in the harsh environment The product is suitable for measurement, navigation and control of aircraft, vehicle, robots, water vehicle, photoelectric pod and other carriers

Features

  • Strong adaptability: silicon micro MEMS device, strong vibration and shock resistance.
  • High device accuracy: very low noise gyroscope, zero bias stability 5° / h (10s smooth).
  • Good user experience: support RS-422 interface, support output bandwidth, support output protocol, support online upload.
  • Program / parameters.
  • The maximum output frequency is 2000 Hz.

Product Specification

Features Specs
Measuring range
± 500° / s
Scaling factor repeatability
<100ppm
Scale due to nonlinearity
<200ppm
Zero-bias stability (Allan variance)
1.5 ° / h
Zero-bias stability (10s smoothing)
5 ° / h
Angular velocity random walk
<0.2 ° / hr
Bandwidth
200Hz (customizable)
Features Specs
Measurement range
± 16
Scale factor nonlinearity
0. 1%
Zero-bias stability
0.2 mg
Resolution
0.2mg
Measurement range
± 16
Features Specs
Operating voltage
4.5 ~ 5.5V DC
Power consumption
250 mW
Communication interface
RS-422
Operating temperature
-40℃ ~ + 60℃
Dimensions
22mm 20mm 8.7mm
MTBF
50000h
Impact limit
2000g (charged)
Weight
not more than 15g
Output frequency
1~2000Hz
Working vibration
8g, RMS (20Hz-2 kHz)

Weight

3.5 KG

Flight Radius

15 KM

Altitude

400 M

Hovering Time

45 Minutes

Inertial Measurement Unit

MU863B

The MU863B product is an inertial measurement unit (IMU) equipped with a built-in gyroscope and accelerometer. The full temperature range parameters of the electronic components used are compensated internally. The angular velocity and linear acceleration of the output carrier can maintain high measurement accuracy for a long time. Advanced MEMS process, structural sealing design and other measures are adopted to ensure the adaptability of the products in the harsh environment. The product is suitable for measurement, navigation and control of aircraft, vehicles, robots, water vehicles, photoelectric pods and other carriers. The product can replace the same performance products and low-precision fiber gyro products, providing customized services according to the needs of users.

Features

  • Small volume, low power consumption.
  • High bandwidth, low latency.
  • -40℃ to + 80℃ to full temperature calibration compensation.
  • Resistance to the harsh mechanical environment.
  • With the software online upgrade function.
  • The maximum output frequency is 2,000 Hz.

Product Specification

Features Specs
Measuring range
500/s, customizable
Zero partial stability
≤ 0.5/h (Allan Curve , 1σ)
The scale factor is nonlinearity
≤ 100ppm
The angular velocity is a random walk:
≤ 0.125°/hr
Tape width
250 H z(customizable)
Noise
0.125/s
Features Specs
Support Frequencies
433m, 900M, 2.4G,
5.2G, 5.8G, 1.4G
Working Temperature
-40 to +70℃
Working Time
7*24H
Power supply
AC 110V-240V
Dimensions
410mm × 330mm × 190mm
Features Specs
Source
4.5 ~ 5.5V DC
(Typical value 5V)
Power dissipation
≤ 2 W
Storage + 85 temperature
-55 ~+ 85℃
Working temperature
-40 ~ +60℃
Refresh rate
≤ 2000Hz
Size
44.8mm × 38.6mm × 16.5mm
Start time
≤ 2s
Vibrate
12g，RMS
MTBF
50000h
Lash
Charged2,000g
CI
RS-422
Weight
Not more than 50g