COMPONENT SUPPLY

Weight

3.5 KG

Flight Radius

15 KM

Altitude

400 M

Hovering Time

45 Minutes

Inertial Measurement Unit

MU232

MU232 adopts the inertial measurement unit (IMU) of high precision gyroscope and accelerometer, and carries out the internal parameter compensation of the full temperature range. The angular velocity and linear acceleration of the output carrier can maintain a high measurement accuracy for a long time. Advanced MEMS process, structural sealing design and other measures to ensure the adaptability of the product in the harsh environment The product is suitable for measurement, navigation and control of aircraft, vehicle, robots, water vehicle, photoelectric pod and other carriers

Features

  • Strong adaptability: silicon micro MEMS device, strong vibration and shock resistance.
  • High device accuracy: very low noise gyroscope, zero bias stability 5° / h (10s smooth).
  • Good user experience: support RS-422 interface, support output bandwidth, support output protocol, support online upload.
  • Program / parameters.
  • The maximum output frequency is 2000 Hz.

Product Specification

Features Specs
Measuring range
± 500° / s
Scaling factor repeatability
<100ppm
Scale due to nonlinearity
<200ppm
Zero-bias stability (Allan variance)
1.5 ° / h
Zero-bias stability (10s smoothing)
5 ° / h
Angular velocity random walk
<0.2 ° / hr
Bandwidth
200Hz (customizable)
Features Specs
Measurement range
± 16
Scale factor nonlinearity
0. 1%
Zero-bias stability
0.2 mg
Resolution
0.2mg
Measurement range
± 16
Features Specs
Operating voltage
4.5 ~ 5.5V DC
Power consumption
250 mW
Communication interface
RS-422
Operating temperature
-40℃ ~ + 60℃
Dimensions
22mm 20mm 8.7mm
MTBF
50000h
Impact limit
2000g (charged)
Weight
not more than 15g
Output frequency
1~2000Hz
Working vibration
8g, RMS (20Hz-2 kHz)

Weight

3.5 KG

Flight Radius

15 KM

Altitude

400 M

Hovering Time

45 Minutes

Inertial Measurement Unit

MU863B

The MU863B product is an inertial measurement unit (IMU) equipped with a built-in gyroscope and accelerometer. The full temperature range parameters of the electronic components used are compensated internally. The angular velocity and linear acceleration of the output carrier can maintain high measurement accuracy for a long time. Advanced MEMS process, structural sealing design and other measures are adopted to ensure the adaptability of the products in the harsh environment. The product is suitable for measurement, navigation and control of aircraft, vehicles, robots, water vehicles, photoelectric pods and other carriers. The product can replace the same performance products and low-precision fiber gyro products, providing customized services according to the needs of users.

Features

  • Small volume, low power consumption.
  • High bandwidth, low latency.
  • -40℃ to + 80℃ to full temperature calibration compensation.
  • Resistance to the harsh mechanical environment.
  • With the software online upgrade function.
  • The maximum output frequency is 2,000 Hz.

Product Specification

Features Specs
Measuring range
500/s, customizable
Zero partial stability
≤ 0.5/h (Allan Curve , 1σ)
The scale factor is nonlinearity
≤ 100ppm
The angular velocity is a random walk:
≤ 0.125°/hr
Tape width
250 H z(customizable)
Noise
0.125/s
Features Specs
Support Frequencies
433m, 900M, 2.4G,
5.2G, 5.8G, 1.4G
Working Temperature
-40 to +70℃
Working Time
7*24H
Power supply
AC 110V-240V
Dimensions
410mm × 330mm × 190mm
Features Specs
Source
4.5 ~ 5.5V DC
(Typical value 5V)
Power dissipation
≤ 2 W
Storage + 85 temperature
-55 ~+ 85℃
Working temperature
-40 ~ +60℃
Refresh rate
≤ 2000Hz
Size
44.8mm × 38.6mm × 16.5mm
Start time
≤ 2s
Vibrate
12g,RMS
MTBF
50000h
Lash
Charged2,000g
CI
RS-422
Weight
Not more than 50g

Weight

3.5 KG

Flight Radius

15 KM

Altitude

400 M

Hovering Time

45 Minutes

Network Onboard Module

The airborne self-organizing network radio is mounted on the launch platform and achieves long-distance communication across regions through aerial multi-point relay and dynamic cluster networking. It can be mounted on various heterogeneous launch platforms, with low network latency and large scale, up to 256 nodes. Suitable for various scenarios such as swarm operations, forest fire prevention, reconnaissance and search, and power inspections.

Features

  • High bandwidth
  • Low power consumption
  • Small size
  • Light weight
  • rich interfaces

Product Specification

Features Specs
Networking mode
Point to point, point to multipoint, star network, chain network, mesh network
Network size
≥64
Power on and network connection time
≤30s
Multi hop capability
≥63
Single hop delay
≤3ms
Encryption
AES128
Features Specs
Receiver sensitivity
≤-97dBm @1Mbps@5MHz; ≤-93dBm @7Mbps@10MHz
Working bandwidth
5MHz、10MHz、20MHz, customizable
Working frequency band
200MHz-1800MHz, customizable
User rate
maximum speed≥80Mbps
Output power
2×1W(Average power)
Features Specs
Overall machine
Maximum power consumption of 16W, average power consumption of 7W
Power supply
12~30V
Data interface
100Mbps Ethernet
Multi hop capability
≥63
Main antenna interface
SMA
Pilot lamp
Signal strength indicator light
Protective class
IP67
Operation temperature
-40℃~+55℃
Storage temperature
-55℃~+70℃
Volume
110 × 58 × 15mm
Weight
134g

Weight

3.5 KG

Flight Radius

15 KM

Altitude

400 M

Hovering Time

45 Minutes

Network OEM Module

Small in size and light in weight, it is easy to integrate into various systems and is suitable for being equipped on drones, unmanned ships, robots, or other unmanned equipment. Featuring fast deployment, high compatibility, lightweight and compact design, low power consumption, and high bandwidth. Rich interfaces, flexible networking, and ready to use upon startup, it can provide IP transparent transmission channels for upper level applications such as video, voice, and data.

Product Specification

Features Specs
Networking mode
Point to point, point to multipoint, star network, chain network, mesh network
Network size
≥64
Power on and network connection time
≤30s
Multi hop capability
≥63
Single hop delay
≤3ms
Encryption
AES128
Features Specs
Working frequency band
200MHz-1800MHz, customizable
Working bandwidth
5MHz, 10MHz, 20MHz, customizable
Receiver sensitivity
≤-95dBm @1Mbps@5MHz;≤-93dBm @7Mbps@10MHz
User rate
maximum speed≥80Mbps
Output power
2×0.5W, 2 × 1W, 2 × 2W (customizable), Double sending and double receiving
Features Specs
Overall machine
Maximum power consumption of 30W, average power consumption of 6W(2x2W)
Operation
Supports voice intercom, video image and IP data transmission
Power supply
10~30V DC power supply
Audio and video data
2×100Mbps Ethernet
Main antenna interface
2×SMA
Pilot lamp
Signal strength indicator light
Volume
70 × 36 × 17.5 mm (2×2W size)
Weight
≤65g
Protective class
IP67

Weight

3.5 KG

Flight Radius

15 KM

Altitude

400 M

Hovering Time

45 Minutes

Network Individual Terminal

Individual handheld self-organizing network radios are an ideal choice for achieving rapid communication between individuals and teams in complex and harsh environments. No need to rely on communication base stations, network access in 3 seconds, reorganization in 5 seconds, quickly build a broadband distributed network, and achieve real-time interaction of voice, data, video and other information. Far superior to communication methods such as intercom, cluster, and mobile phones, it is suitable for various scenarios such as cities, jungles, deserts, islands, potholes, and mountainous areas.

Product Specification

Features Specs
Networking mode
Point to point, point to multipoint, star network, chain network, mesh network
Network size
≥64
Power on and network connection time
≤30s
Multi hop capability
≥63
Single hop delay
≤3ms
Encryption
AES128
Features Specs
Working frequency band
200MHz-1800MHz, customizable
Working bandwidth
5MHz, 10MHz, 20MHz, customizable
Receiver sensitivity
≤-95dBm @1Mbps@5MHz;≤-93dBm @7Mbps@10MHz
User rate
maximum speed≥80Mbps
Output power
2×0.5W,Double sending and double receiving
Features Specs
Overall machine
Maximum power consumption of 13W, average power consumption of 5W (2x2W)
Battery life
≥ 6h, standby time ≥12h
Power supply
9~30V
Audio and video data
100Mbps Ethernet port, HDMI video interface, 3.5 audio interface
Main antenna interface
TNC interface, omnidirectional antenna
WIFI antenna
SMA
Storage temperature
-40℃~+55℃
Pilot lamp
Signal strength indicator light, battery level display light
Positioning Antenna Interface
SMA
Volume
148 × 75 × 30mm
Weight
≤500g
Operation temperature
-55℃~+70℃
Protective class
IP67

Weight

3.5 KG

Flight Radius

15 KM

Altitude

400 M

Hovering Time

45 Minutes

Flight Control Module

The power supply is equipped with EMI filtering, surge resistance, and supports 50ms power outage maintenance capability, interface isolation design, integrated inertial navigation, digital barometer, GPS positioning and orientation.

Product Specification

Features Specs
Steady-state voltage
DC12V~36V
Overall Power Consumption
≯15W
CPU main frequency
866.6MHz
RAM
512MB@DDR3
FLASH
32MB@QSPI
F-RAM
2Mbit
Data Storage
16GB@eMMC
Inertial navigation
Three axis gyroscope, three-axis accelerometer, three-axis magnetic compass
Static pressure sensor
115kPa
Dynamic pressure transducer
-25~+25kPa
Isolation CAN
2-way
Analog input
4-way±10VDC
Isolation RS232
4-way
Isolation
RS422/RS485:15-way(RS422*13-way; RS422/RS485*2;-way,Software configurable)
Discrete magnitude input
4-wayPower/ON orGND/ON(Hardware configurable)
Discrete magnitude output
8-wayPower/ON orGND/ON(Hardware configurable)
Positioning and directional function
Support GPS, GLONASS, Galileo, BeiDou
Ethernet
1-way10/100Mself-adaption
Features Specs
Color
silver gray
Weight
662g
Maximum external dimensions
≯150 × 110 × 60 mm
Operation temperature
-40℃~+55℃
Storage temperature
-55℃~65℃

Weight

3.5 KG

Flight Radius

15 KM

Altitude

400 M

Hovering Time

45 Minutes

Power Management Unit

The power supply is equipped with EMI filtering, surge resistance, and supports 50ms power outage maintenance capability, interface isolation design, integrated inertial navigation, digital barometer, GPS positioning and orientation.

Features

  • Remote Power Generation
  • Power Regulation from Alternative sources, ex. wind or solar
  • Unmanned Air Vehicles (UAV’s) and Unmanned Ground

Product Specification

Features Specs
Power Supply
3 Phase AC primary input, 25 - 95 VACrms
Peak power
Operates up to 93%
Integrated start control
compatible with inductive and non inductive drive, with good start performance
Features Specs
Power Supply
3 Phase AC primary input, 25 - 95 VACrms
Peak power
Operates up to 91%
Features Specs
Power Supply
3 Phase AC primary input, 25 - 95 VACrms
Peak power
Operates up to 93%